Micro PDM high-side modules
High-side MicroPDMs provide up to 2.5A of continuous current for each output. High-side outputs must be connected to the positive (+) side of the load. That means you can run many motorsport devices directly off the PDM module like dashes, cameras, rain lights, coolsuit pumps, etc. For larger loads, just use a relay and drive the relay coil with the PDM output.
Check out our low-side modules if you want to add PDM capabilities to your ground-switched devices.
|Mounting||2 micro 280 relay footprint|
|Connector||2.8 mm tab|
|Temperature range||-40 °C to +85 °C|
|Environmental protection||IP 67 in combination with fuse box|
|Total outputs||7 digital outputs|
|CAN interface||CAN interface 2.0 A/B|
|Standby current||23 mA|
|Over-current protection||1 A + load|
|Overvoltage protection||≥ 33 V|
|Undervoltage cut-off||≤ 6 V|
|Reverse polarity protection||Yes|
|Output load rating (high-side)||2.5 A permanent per output with current monitoring on CAN bus|