The Syltech Heavy Duty Bulkhead/Firewall Isolator Electrical Terminal Kit is designed for use where large amounts of current needs to pass through a bulkhead or firewall without the risk of shorts, or leaks. Perfect for passing through fuel tank bulkheads when upgrading pumps, or running through firewalls to provide power to electric power steering pumps or other high-load devices.
These terminals ensure there is a seal from fluid and fumes by using a Viton o-ring. This also means they are fuel safe (including ethanol based fuels). On top of this, they come with external dust boots to protect the exterior side from shorting and dust and fluid incursion.
Type: Bulkhead Electrical Isolator Terminal (2)
Maximum Power Rating : 50AMP
Fitting Composition: Polyoxymethylene
Seal Composition: Viton
Stud Composition: Stainless Steel
Stud Diameter: 6mm
Stud Length: 30mm
Connection: M6 terminal for eyelet wire crimp
- 2x Allen key studs
- 4x Nylock nuts
- 8x Washers
- 4x Isolator blocks with Viton o-rings
- 2x External dust boots
Mounting instructions/datasheet available here: SS-0717-200_QAD