Syltech – Fluid Temp Sensor

$49.50

Fluid Temp Sensor

  • Stainless Steel construction
  • Suitable for Water, Oil, Transmission, Differentials, WAIC setup and much more.
  • -30c to 200c range
  • 1/8″ NPT Thread

19 in stock (can be backordered)

Description

Closed Element Fluid Temp Sensor, 1/8″ NPT, -30 to 200degC

Unlike others on the market with a “one type temp range suits all” approach, these sensors have custom chosen elements to operate within the temperature scales of motorsport cars and not your usual lower OEM factory temperatures. These scales ensure the largest voltage gaps between ECU pull-up readings for the most accurate output, and to minimize ground gitters in problematic wiring harnesses.

All shells in the ‘MSTS SS’ series are stainless steel construction.

The closed element sensors are filled with a thermal transfer compound and not hollow like others! This will ensure an even and fast temperature reading is registered by the element.

They have completely sealed internals, including dipped epoxy and affixed to multi strand tinned wire that is high temp coated. This minimises shorts and breaks between the element and the connector caused by harsh vibration and corrosion often seen in exposed rigid single core wired sensor equivalents.

Elements are affixed to gold plated Deutsch DTM pins (0460-202-2031) and overmolded with PA66 high temp composite plastic housing to ensure a perfect fit for any 2pin Deutsch DTM06-2S connector.

Most important feature we feel is they’re Aussie made! Syltech assembles and tests all these sensors in house.

 

Calibration Table:

Temperature
(°C)
Resistance (Ω) Voltage (V)
1kΩ Pull-Up @ 5VDC
-30 179266 4.972
-25 131733 4.970
-20 97839 4.949
-15 73401 4.933
-10 55595 4.912
-5 42490 4.885
0 32754 4.852
5 25456 4.811
10 19938 4.761
15 15731 4.701
20 12500 4.630
25 10000 4.545
30 8051 4.448
35 6522 4.335
40 5314 4.208
45 4355 4.066
50 3588 3.910
55 2971 3.741
60 2473 3.560
65 2068 3.370
70 1738 3.174
75 1466 2.972
80 1243 2.771
85 1058 2.570
90 904 2.374
95 775 2.183
100 667 2.001
105 576 1.827
110 500 1.667
115 435 1.516
120 379 1.374
125 332 1.246
130 292 1.130
135 257 1.022
140 227 0.925
145 201 0.837
150 179 0.759
155 159 0.686
160 142 0.622
165 127 0.563
170 114 0.512
175 103 0.467
180 93 0.425
185 84 0.387
190 76 0.353
195 69 0.323
200 63 0.296

Installation Suggestions

Crimp connector pins with DET20 Tool

Boot connector with SCL Heat shrink 

Connect with 20 ga Wire

Additional Deutsch pins can be found here

Reviews

There are no reviews yet.

Be the first to review “Syltech – Fluid Temp Sensor”

Your email address will not be published. Required fields are marked *

You may also like…

  • Syltech – Combined Pressure and Temp Sensor

    $165.00
    Add to cart