Syltech – Air Temperature Sensor

$49.50

  • Stainless Steel Body
  • Motorsport Grade
  • 1/8″ NPT Thread
  • -30c to 150c Range
  • Deutsch connector included.

 

9 in stock (can be backordered)

Description

(Air Temp) Open Element “Fast Response” IAT Temp Sensor, 1/8″ NPT, -30 to 150degC

Unlike others on the market with a “one type temp range suits all” approach, these sensors have custom chosen elements to operate within the temperature scales of motorsport cars and not your usual lower OEM factory temperatures. These scales ensure the largest voltage gaps between ECU pull-up readings for the most accurate output, and to minimize ground gitters in problematic wiring harnesses.

This Air Temp Sensor is constructed from stainless steel with an open element sensor tip construction, these are one piece stainless with no plastic included in the main sensor body for ultimate reliability in harsh high-temp environments.

They have completely sealed internals, including dipped epoxy and affixed to multi strand tinned wire that is high temp coated. This minimises the chance for shorts and breaks between the element and the connector caused by harsh vibration and corrosion often seen in competitors exposed rigid single core wired sensor equivalents.

Elements are affixed to gold plated Deutsch DTM pins (0460-202-2031) and over molded with PA66 high temp composite plastic housing to ensure a perfect fit for any 2pin Deutsch DTM06-2S connector.

Most important feature we feel is they’re Aussie made! Syltech assembles and tests all these sensors in house.

Calibration Table:

Temperature
(°C)
Resistance (Ω) Voltage (V)
1kΩ Pull-Up @ 5VDC
-30 50601 4.903
-25 36877 4.868
-20 27192 4.823
-15 20274 4.765
-10 15275 4.693
-5 11622 4.604
0 8926 4.496
5 6916 4.368
10 5404 4.219
15 4256 4.049
20 3378 3.858
25 2700 3.649
30 2172 3.424
35 1760 3.188
40 1434 2.946
45 1176 2.702
50 970 2.462
55 804 2.228
60 670 2.006
65 561 1.757
70 472 1.603
75 399 1.426
80 338 1.263
85 288 1.118
90 247 0.990
95 212 0.875
100 183 0.773
105 158 0.682
110 137 0.602
115 120 0.536
120 105 0.475
125 92 0.421
130 80 0.370
135 71 0.318
140 63 0.283
145 56 0.252
150 49 0.234

Installation Suggestions

Crimp connector pins with DET20 Tool

Boot connector with SCL Heat shrink 

Connect with 20 ga Wire

Additional Deutsch pins can be found here

Reviews

There are no reviews yet.

Be the first to review “Syltech – Air Temperature Sensor”

Your email address will not be published. Required fields are marked *